Transesterification of Palm Oil Catalyzed by CaO/SiO2 Prepared from Limestone and Rice Husk Silica
DOI:
https://doi.org/10.47352/jmans.2774-3047.90Keywords:
biodieselAbstract
In this study, CaO/SiO2 composites were prepared from rice husk silica (RH-SiO2) and limestone from a local company. The composites with different mass ratios of CaO to SiO2 (1:1, 1:2, 1:3, 1:5, and 1:10) were synthesized using the sol-gel technique and characterized using XRF, XRD, and SEM. The composites were then used as catalysts for the transesterification of palm oil, with the main purpose to investigate the effect of catalyst compositions on the percentage of conversion of the oil. The results of XRD and SEM confirm the existence of RH-SiO2 as an amorphous material, and CaO as crystalline material, while the composites are a mixture of amorphous and crystalline phases. The catalysts were then used in transesterification experiments and the percentage of oil conversion was calculated. To confirm the successful conversion of palm oil into fatty acid methyl esters, the products of the reactions were analyzed using GC-MS. The experimental results demonstrated that the composites prepared exhibit catalytic activity, with the highest conversion (60%) achieved using the catalyst with the CaO to SiO2 ratio of 1:3.Downloads
Published
2024-01-31
Issue
Section
Articles
License
Copyright (c) 2024 Sri Elfina, Kamisah Delilawati Pandiangan, Novesar Jamarun, Fejri Subriadi, Hafnimardiyanti Hafnimardiyanti, Roswita Roswita (Author)

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and acknowledge that the Journal of Multidisciplinary Applied Natural Science is the first publisher, licensed under a Creative Commons Attribution 4.0 International License.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges and earlier and greater citation of published work.





